CringeGames
Member
Hi All,
I recently went through a 'fun' bit of microphone troubles and thought I should share my experience so others might not make the same mistakes! This might be a bit of a long post, but I hope it helps someone
For a bit of background, I live in a rental apartment with my computer near a couple of windows in a corner. Which is great to look out on, but terrible for noise. Because I am in a rental I cannot acoustically treat the room.
Story time! I did lots of research on different microphones and finally made a decision: A dynamic mic should reject the background noise the best. Boy was I wrong. I bought a USB interface (Roland Duo-Capture EX) and the Shure SM57. The problem here was that in order to not be kissing the mic all of the time, I had to crank the gain so high that noise was introduced anyhow. So that mic went back.
Mic #2 was a shotgun mic because it was recommended due to it's polar pattern. But, sadly, because of how my room is setup, it cause reverberations and my recording was always echo-y. This mic was about twice the price of the SM57 and didn't work either. Sometimes throwing money at the problem isn't a good idea. Especially since it blew my budget out of the water.
Mic #3 is the AT2020 from Audio-Technica. Boy is this the correct choice for me! Don't get me wrong, my crazy noisy Blackwidow Chroma is noticeable, but it isn't terrible. This mic plus an arm and a foam thing that goes on the head of the mic has cut out a lot of the background noise, like a computer humming along. I can now see why this is the choice of mic for many streamers.
As a side note, I am running my mic through Reaper and doing some live work to further cut out noise. I highly suggest something like Reaper or VST-Host to do some sound processing. It only adds 6ms of delay for me. Which is really nothing.
Let me know if you have any questions about my setup! Or comments on how to improve this post
I recently went through a 'fun' bit of microphone troubles and thought I should share my experience so others might not make the same mistakes! This might be a bit of a long post, but I hope it helps someone

For a bit of background, I live in a rental apartment with my computer near a couple of windows in a corner. Which is great to look out on, but terrible for noise. Because I am in a rental I cannot acoustically treat the room.
Story time! I did lots of research on different microphones and finally made a decision: A dynamic mic should reject the background noise the best. Boy was I wrong. I bought a USB interface (Roland Duo-Capture EX) and the Shure SM57. The problem here was that in order to not be kissing the mic all of the time, I had to crank the gain so high that noise was introduced anyhow. So that mic went back.
Mic #2 was a shotgun mic because it was recommended due to it's polar pattern. But, sadly, because of how my room is setup, it cause reverberations and my recording was always echo-y. This mic was about twice the price of the SM57 and didn't work either. Sometimes throwing money at the problem isn't a good idea. Especially since it blew my budget out of the water.
Mic #3 is the AT2020 from Audio-Technica. Boy is this the correct choice for me! Don't get me wrong, my crazy noisy Blackwidow Chroma is noticeable, but it isn't terrible. This mic plus an arm and a foam thing that goes on the head of the mic has cut out a lot of the background noise, like a computer humming along. I can now see why this is the choice of mic for many streamers.
As a side note, I am running my mic through Reaper and doing some live work to further cut out noise. I highly suggest something like Reaper or VST-Host to do some sound processing. It only adds 6ms of delay for me. Which is really nothing.
Let me know if you have any questions about my setup! Or comments on how to improve this post
