Need help with video quality settings

I am fairly new to uploading to YouTube. i am uploading 1080p video, standard video quality, and after upload and processing, my uploaded videos always play in 360 or 480, even though 1080 is available if i choose to switch it. If i switch the quality to 1080p, then it will stay there until i close app for a bit and reopen,. Then my videos are back to 360p or 480p even though it is available in 1080p. The weird part is that if i watch almost any other video (uploaded by someone else) they ALWAYS start out in 1080p. This happens on my home wifi with 350 mbs dowload speed. I know that it may take a while for 1080p to be available with recently uploaded videos, but i have ruled that out, as this phenomenon is happening with videos i have uploaded months ago.

Is it because i am not a subscriber to YouTube? Thanks in advance!!
 
Yeah i kind of figured that out along the way...it's just weird that my videos start up in 360 and then i immediately watch someone else's video and it starts in 1080, same location, same internet speed, etc. Thanks though!
 
Hmm.. maybe you could try with the settings in your editing software, I use filmora and I always apply the automatic enhance to the content I'm editing (that kind of gives that hd quality) and also you can export in three types of "qualitys" good, very good and excelent.
 
See if the videos that start in 1080p have higher versions, such as 1440p and 4K. Videos that are uploaded to YouTube in higher resolution than 1080P get encoded with the VP9 codec. Videos that are uploaded in 1080p get encoded with the AVC codec. VP9 is a more advanced codec that allows for smoother streaming of higher quality videos. Youtube reserves the VP9 codec for the big channels, but you can force your videos to be encoded with it by uploading them in above 1080p quality.
 
Thanks for the input. I am using lumafusion on an iPad 11. There are several video qualities to choose from the lowest being web and the highest being extreme. That essentially translates to about 6 megabits per second on the low end up to 150 megabits per second on the high-end. I found a chart in YouTube help that recommends appropriate bitrate for upload depending upon framerate, standard or high-definition, and a couple of other factors. I'm trying to soak in all the knowledge I can to understand the process , but it seems like it is not 100% that it will be the same every time. At least in my experience so far. For instance I watched one of my videos connected to my home Wi-Fi but I was outside and it played in 360p. I walked inside and stood right next to the router with 300 megabytes per second download speed and the video then played in 480p. At that point I changed it to 1080P and the picture became crystal clear. It's a learning process for sure but I appreciate any input
 
Thanks for the input. I am using lumafusion on an iPad 11. There are several video qualities to choose from the lowest being web and the highest being extreme. That essentially translates to about 6 megabits per second on the low end up to 150 megabits per second on the high-end. I found a chart in YouTube help that recommends appropriate bitrate for upload depending upon framerate, standard or high-definition, and a couple of other factors. I'm trying to soak in all the knowledge I can to understand the process , but it seems like it is not 100% that it will be the same every time. At least in my experience so far. For instance I watched one of my videos connected to my home Wi-Fi but I was outside and it played in 360p. I walked inside and stood right next to the router with 300 megabytes per second download speed and the video then played in 480p. At that point I changed it to 1080P and the picture became crystal clear. It's a learning process for sure but I appreciate any input

There are a lot of variables that could be causing your results. The first thing is to measure your internet speed. So head over to speedtest.net and run a test on your ISP service. ISPs don't always deliver what you are paying for. Also, the time of day has a lot to do with it. Unless you are on a dedicated Business service, you are are on a shared service, which means that you are sharing a pool of bandwidth with hundreds of other people. You might have great speeds at 4:00am when no one else is using their bandwidth. But at 7:00pm when everyone has gotten home from work, eaten supper and is watching Netflix (streaming media), your connection speed may be nothing, because regardless of what you are paying for, you ISP only has so much bandwidth to offer, and as more people take a piece of that pie, the slices get smaller and smaller until it is paper-thin.

There could also be a bottleneck on your system. Certain pieces of hardware get "Priority" service over other things. Xbox One is one of these. This has to do with contracts that Microsoft has paid so that ISPs will give Xboxes priority bandwidth over other devices. PC's and smartphones do not get this priority service. So if someone is watching the 4K streaming video on an Xbox, in your house, it will suck up all the bandwidth. Another thing is wifi extenders. Extenders are really bad at hogging network bandwidth or causing network issues on devices connected to the main network.

The list goes on and on, of what might be the cause, including a neighbor that has hacked into your network and is stealing internet service from you. The best thing to do is disconnect everything but the device you are using. Log on to your router management page and see what else is on your network. If you see something that is on there besides the one device you are using, you can block that MAC address, and change your network password to something more difficult to hack. When you are certain, that only one device is connected, run the speednet.net test and see what you get.
 
That is good advice. I do from time to time check to see what devices are connected to my network. So far all of them have been recognizable. We do not have any gaming systems in our home. I have performed this test when I am the only device on our Network. The funny part is that I can click on a video I've uploaded 5 days ago or 6 months ago and it will always without fail open in 360 or 480 but then without changing the video quality selection I can immediately go to a dozen other YouTube videos uploaded by various people around the world and inevitably they all open in 1080. I have run speedtest.com before and after this trial with about 350 megabytes down. I just firmly believe it has something to do with the way I am uploading my videos. I am using H264 codec, I have tried various video quality from low to high bitrate , and I upload as MP4 format, and I export the videos from lumafusion at the same framerate that they are taken in. I am shooting drone video mostly in 1080p 60 frames per second and that's the way I set the export settings as well. I will just keep on trying until I can get it figured out. But thanks for the advice from everyone
 
That is good advice. I do from time to time check to see what devices are connected to my network. So far all of them have been recognizable. We do not have any gaming systems in our home. I have performed this test when I am the only device on our Network. The funny part is that I can click on a video I've uploaded 5 days ago or 6 months ago and it will always without fail open in 360 or 480 but then without changing the video quality selection I can immediately go to a dozen other YouTube videos uploaded by various people around the world and inevitably they all open in 1080. I have run speedtest.com before and after this trial with about 350 megabytes down. I just firmly believe it has something to do with the way I am uploading my videos. I am using H264 codec, I have tried various video quality from low to high bitrate , and I upload as MP4 format, and I export the videos from lumafusion at the same framerate that they are taken in. I am shooting drone video mostly in 1080p 60 frames per second and that's the way I set the export settings as well. I will just keep on trying until I can get it figured out. But thanks for the advice from everyone

Wow! You have covered your bases. You got me stumped. Is this only happening on one device (i.e. smartphone) or all your devices?
 
Actually that brings up a very good point. Yes it happens on the same iPad that I run lumafusion on. When I use the YouTube app to view what I have uploaded after it is fully processed and become available in high definition of course, it will always default to a lower quality. Same thing with my Galaxy Note 10 plus. Same thing on my Dell laptop computer on a broadband connection at my work. Always my videos play in 360 or 480 right out of the gate unless I switched them to a higher quality manually, but any other video I click on usually plays in 1080 or better. I was kind of wondering if it might be that I do not have a YouTube subscription and I have exceeded what they will give storage wise for a freebie account? Don't know if that makes a difference or not but it has crossed my mind. I have even tried creating another YouTube account because I thought maybe being logged into my channel might be creating an issue. So I basically viewed my videos as if I were somebody else viewing them and the same issue occurs all the way around as to what I described above. I am baffled but I am tempted to pay the $10 a month for YouTube premium to see if it makes a difference
 
Back
Top